high temperature involved
frequent wheel clogging
rapid wheel wear
low work piece stiffne
✅ The correct answer is option B.
Production Engineering MCQs
Thread grinding requires work speed from
1 to 3 m/min
5 to 10 m/min
10 to 14 m/min
14 to 20 m/min
✅ The correct answer is option A.
Holes are machined by push broaches only for sizing.
Correct
Incorrect
✅ The correct answer is option A.
A fine grained grinding wheel is used to grind
hard and brittle materials
soft and ductile materials
hard and ductile materials
soft and brittle mater
✅ The correct answer is option A.
Which of the following operations is carried out at a minimum cutting velocity if the machines are equally rigid and the tool work materials are the same?
Turning
Grinding
Boring
Milling
✅ The correct answer is option D.
In __________ operation, the chip thickness is minimum at the beginning of the cut and it reaches to the maximum when the cut terminates.
conventional milling
climb milling
face milling
end milling
✅ The correct answer is option A.
The infeed grinding is used to
produce tapers
grind shoulders and formed surfaces
grind long, slender shafts or bars
ail of these
✅ The correct answer is option B.
The grade of grinding wheel depends upon
hardness of the material being ground
speed of wheel and work
condition of grinding machine
all of these
✅ The correct answer is option D.
Which of the following statement is correct about hot machining?
It requires less power than machining metals at room temperature.
The rate of tool wear is lower.
It is used for machining high strength and high temperature resistant materials.
all of the above
✅ The correct answer is option D.
The continuous chips are in the form of long coils having the same thickness throughout.
Agree
Disagree
✅ The correct answer is option A.