The frequency of damped vibrations with viscous damping is __________ the frequency of undamped vibrations. September 14, 2025 by Admin more than less than same as ✅ The correct answer is option B.
The battery is an electrochemical device, which means battery September 14, 2025 by Admin makes chemicals by mechanical means uses chemical action to provide electricity has curved plates instead of flat plates does not use an electrolyte ✅ The correct answer is option B.
In order to give the primary balance of the reciprocating parts of a multi-cylinder in-line engines, September 14, 2025 by Admin the algebraic sum of the primary forces must be equal to zero the algebraic sum of the couples about any point in the plane of the primary forces must be equal to zero both (a) and (b) none of these ✅ The correct answer is option C.
When a rectangular beam is loaded transversely, the maximum compressive stress is developed on the September 14, 2025 by Admin top layer bottom layer neutral axis every cross-section ✅ The correct answer is option B.
If the depth is kept constant for a beam of uniform strength, then its width will vary in proportional to (where M = Bending moment) September 14, 2025 by Admin M M M2 M3 ✅ The correct answer is option A.
Positive camber is used to compensate for wheels tilting inward due to the weight of the vehicle. September 14, 2025 by Admin Yes No ✅ The correct answer is option A.
The turbine blades do not change the direction of steam issuing from the nozzle. September 14, 2025 by Admin TRUE FALSE ✅ The correct answer is option B.
Defrosting of a refrigerator may be done by stopping the compressor for a short period. September 14, 2025 by Admin Correct Incorrect ✅ The correct answer is option A.
If the tearing efficiency of a riveted joint is 50%, then ratio of rivet hole diameter to the pitch of rivets is September 14, 2025 by Admin 0.2 0.3 0.5 0.6 ✅ The correct answer is option C.
The diagram which shows the correct crank positions corresponding to the opening and closing of the valves, is known as September 14, 2025 by Admin indicator diagram axial force diagram valve timing diagram none of these ✅ The correct answer is option C.