the vertical size of the suspension can be made more compact
non-vertical external forces are supported by the suspension arms
the unsprung mass in lighter
the assembly is slight
✅ The correct answer is option B.
Engineering MCQs
The unit of surface tension is
N/m
N/m2
N/m3
N-m
✅ The correct answer is option A.
When slack of an activity is zero, the activity is critical and any delay in its performance will delay the completion of the whole project.
Yes
No
✅ The correct answer is option A.
Two pulleys of radii r1 and r2 and at distance x apart are connected by means of an open belt drive. The length of the belt is
✅ The correct answer is option B.
According to Euler’s column theory, the crippling load for a column length (l) hinged at both ends, is
✅ The correct answer is option A.
The amount of water evaporated or steam produced in kg per kg of fuel burnt is known as power of a boiler.
TRUE
FALSE
✅ The correct answer is option A.
Bronze is an alloy of
copper and zinc
copper and tin
copper, tin and zinc
none of these
✅ The correct answer is option B.
The Ackerman steering gear mechanism is preferred to the Davis steering gear mechanism, because
whole of the mechanism in the Ackerman steering gear is on the back of the front wheels
the Ackerman steering gear consists of turning pairs
the Ackerman steering gear is most economical
both (a) and (b)
✅ The correct answer is option D.
A tensile test is performed on a round bar. After fracture, it has been found that the diameter remains approximately same at fracture. The material under test was
mild steel
cast iron
glass
copper
✅ The correct answer is option B.
The maximum deflection of a cantilever beam of length l with a point load W at the free end is
✅ The correct answer is option A.