The logarithmic mean temperature difference ™ is given by (where Δt1 and Δt2 are temperature differences between the hot and cold fluids at entrance and exit) September 13, 2025 by Admin tm = (Δt1 – Δt1) loge(Δt1/Δt1) ✅ The correct answer is option A.
The mass of excess air supplied is equal to September 13, 2025 by Admin x Mass of excess carbon x Mass of excess oxygen x Mass of excess carbon x Mass of excess oxyg ✅ The correct answer is option D.
For welding plates of thickness more than 12.5 mm, its edges September 13, 2025 by Admin do not require bevelling should be bevelled to a single-V or U-groove should have a double-V or U-groove on one side should have a double-V ✅ The correct answer is option D.
Wet bulb temperature is the temperature of air recorded by a thermometer, when September 13, 2025 by Admin it is not effected by the moisture present in the air its bulb is surrounded by a wet cloth exposed to the air the moisture present in it begins to condense none of the above ✅ The correct answer is option B.
The essential condition of placing the two masses, so that the system becomes dynamically equivalent, is (where l1 and l2 = Distance of two masses from the centre of gravity of the body, and kG = Radius of gyration of the body) September 13, 2025 by Admin l1 = kG l2 = kG l1l2 = kG l1l2 = kG2 ✅ The correct answer is option D.
Mond gas is obtained by September 13, 2025 by Admin partial combusion of coal, coke, anthracite coal or charcoal in a mixed air steam blast carbonisation of bituminous coal passing steam over incandescent coke passing air and a larg ✅ The correct answer is option D.
Which of the following is correct ? (where pa = Actual mean effective pressure, pm = Theoretical mean effective pressure, and K = Diagram factor) September 13, 2025 by Admin pa = pm/K pa = pm x K pa = K/pm pa = pm + K ✅ The correct answer is option B.
In diesel engines, the ignition takes place due to the heat produced in the engine cylinder at the end of compression. September 13, 2025 by Admin Correct Incorrect ✅ The correct answer is option A.
The plain milling machine is more rigid and heavier in construction than a universal milling machine of the same size. September 13, 2025 by Admin Correct Incorrect ✅ The correct answer is option A.
One kg of carbon monoxide requires 4/7 kg of oxygen and produces September 13, 2025 by Admin 11/3 kg of carbon dioxide gas 7/3 kg of carbon monoxide gas 11/7 kg of carbon dioxide gas 8/3 kg of carbon monox ✅ The correct answer is option C.