A. 95.0 MPa on net area
B. 105.5 MPa on net area
C. 105.5 MPa on gross area
D. 150.0 MPa on gross area
✅ The correct answer is option B.
Civil Engineering
Prepare with the latest Civil Engineering MCQs with answers and explanations for exams, interviews, and job tests. Our question bank covers key topics including surveying, building materials, structural engineering, geotechnical engineering, fluid mechanics, hydraulics, transportation engineering, environmental engineering, and construction management. These Civil Engineering multiple-choice questions are designed for students, competitive exam aspirants, and professionals preparing for NTS, PPSC, FPSC, PEC exams, university entry tests, and recruitment assessments. Strengthen your knowledge and problem-solving skills with our updated and comprehensive Civil Engineering MCQs.
1142. The slenderness ratio of lacing bars should not exceed________________?
A. 100
B. 120
C. 145
D. 180
✅ The correct answer is option C.
1143. The connection of intermediate vertical stiffeners to the web, not subjected to external loads, shall be designed for a minimum shear force (kN/m) of___________________?
A. 75 t2/h
B. 125 t3/h2
C. 125 t2/h
D. 175 t2/h
✅ The correct answer is option C.
1144. For the buildings having a low permeability, the internal wind pressure acting normal to the wall and roof surfaces is taken as__________________?
A. zero
B. ±0.2p
C. ± 0.5 p
D. ±0.7p
✅ The correct answer is option B.
1145. Angle of inclination of the lacing bar with the longitudinal axis of the column should preferably be between____________________?
A. 10° to 30°
B. 30° to 40°
C. 40° to 70°
D. 90°
✅ The correct answer is option C.
1146. The forces acting on the web splice of a plate girder are__________________?
A. axial forces
B. shear and axial forces
C. shear and bending forces
D. axial and bending forces
✅ The correct answer is option C.
1147. Maximum pitch of rivets, used in steel stacks, is limited to_______________?
A. 6t
B. 101
C. 121
D. 161
✅ The correct answer is option B.
1148. The use of tie plates in laced columns is_________________?
A. prohibited
B. not prohibited
C. permitted at start and end of lacing system only
D. permitted between two parts of the lacing
✅ The correct answer is option C.
1149. The diameter of base of conical flare of a steel stack is_____________________?
A. less than d
B. equal to d
C. more than d
D. any of the above
✅ The correct answer is option C.
1150. As per IS : 800, for compression flange, the outstand of flange plates should not exceed________________?
A. 121
B. 161
C. 201
D. 251
✅ The correct answer is option B.