The frictional torque transmitted in a conical pivot bearing with assumption of uniform pressure is __________ as compared to uniform wear. September 8, 2025 by Admin less more same ✅ The correct answer is option B.
The frequency of oscillation of a compound pendulum is September 8, 2025 by Admin ✅ The correct answer is option C.
In a steam engine, the link constitutes a September 8, 2025 by Admin piston, piston rod and crosshead connecting rod with big and small end brasses, caps and bolts crank pin, crankshaft and flywheel all of the above ✅ The correct answer is option D.
The static balancing is satisfactory for low speed rotors but with increasing speeds, dynamic balancing becomes necessary. This is because, the September 8, 2025 by Admin unbalanced couples are caused only at higher speeds unbalanced forces are not dangerous at higher speeds effects of unbalances are proportional to the square of the speed effects of unbalances ✅ The correct answer is option C.
The two elements of a pair are said to form a higher pair, when they September 8, 2025 by Admin have a surface contact when in motion have a line or point contact when in motion are kept in contact by the action of external forces, when in motion permit relative motion ✅ The correct answer is option B.
The relative velocity of B with respect to A in a rigid link AB is September 8, 2025 by Admin parallel to AB perpendicular to AB along AB at 45° to AB ✅ The correct answer is option B.
In vibration isolation system, if ω/ωn < 2, then for all values of damping factor, the trans-missibility will be (where ω = Angular speed of the system, ωn = Natural frequency of vibration of the system) September 8, 2025 by Admin less than unity equal to unity greater than unity zero ✅ The correct answer is option C.
The efficiency of a screw jack is maximum, when (where α = Helix angle, and φ = Angle of friction) September 8, 2025 by Admin α = 45° + α = 45° – α = 90° + φ α = 90° – φ ✅ The correct answer is option B.
The ratio of height of Porter governor (when length of arms and links are equal) to the height of Watt’s governor is (where m = Mass of the ball, and M = Mass on the sleeve) September 8, 2025 by Admin ✅ The correct answer is option C.
The throw of the eccentric is equal to the valve travel. September 8, 2025 by Admin Correct Incorrect ✅ The correct answer is option B.