The refrigerant used for absorption refrigerators working on heat from solar collectors is a mixture of water and September 13, 2025 by Admin carbon dioxide sulphur dioxide lithium bromide R-12 ✅ The correct answer is option C.
Pearlite consists of September 13, 2025 by Admin 13% carbon and 87% ferrite 13% cementite and 87% ferrite 13% ferrite and 87% cementite 6.67% carbon and 93.33 ✅ The correct answer is option B.
The strength of the un-riveted or solid plate per pitch length is September 13, 2025 by Admin d.t.σc p.t.σt (p – d)t.σt π/2 x d2 x τ ✅ The correct answer is option B.
Lame’s theory is associated with September 13, 2025 by Admin thin cylindrical shells thick cylindrical shells direct and bending stresses none of these ✅ The correct answer is option B.
The efficiency of a square threaded screw is maximum if the helix angle is equal to (where φ = Angle of friction) September 13, 2025 by Admin 90° – φ 45° – φ 45° – φ/2 45° + φ/2 ✅ The correct answer is option C.
A bar of copper and steel form a composite system, which is heated to a temperature of 40°C. The stress induced in the copper bar will be September 13, 2025 by Admin tensile compressive shear zero ✅ The correct answer is option B.
When α is absorptivity, ρ is reflectivity and τ is transmittivity, then for a diathermanous body, September 13, 2025 by Admin α = 1, ρ = 0 and τ = 0 α = 0, ρ = 1 and τ = 0 α = 0, ρ = 0 and τ = 1 α + ρ = 1 and τ = 0 ✅ The correct answer is option D.
When the expansion of steam is carried out in a single cylinder and then exhausted into the atmosphere or a condenser, the engine is said to be a simple steam engine. September 13, 2025 by Admin Correct Incorrect ✅ The correct answer is option A.
The minimum force required to slide a body of weight W on a rough horizontal plane is September 13, 2025 by Admin W sin θ W cos θ W tan θ W cosec θ ✅ The correct answer is option A.
The motion between a pair when limited to a definite direction, irrespective of the direction of force applied, is known as September 13, 2025 by Admin completely constrained motion incompletely constrained motion successfully constrained motion none of these ✅ The correct answer is option A.