The cutting speed is minimum while machining __________ with a high speed steel tool. September 13, 2025 by Admin cast iron mild steel brass aluminium ✅ The correct answer is option A.
The forces, whose lines of action are parallel to each other and act in the same directions, are known as September 13, 2025 by Admin coplaner concurrent forces coplaner non-concurrent forces like parallel forces unlike parallel forces ✅ The correct answer is option C.
A receiver type compound engine, requires a lighter flywheel. September 13, 2025 by Admin Yes No ✅ The correct answer is option A.
The operating pressure for refrigerating units using R-12 as a refrigerant is September 13, 2025 by Admin 2 bar 8 bar 15 bar 30 bar ✅ The correct answer is option B.
During sensible cooling, September 13, 2025 by Admin relative humidity remains constant wet bulb temperature increases specific humidity increases partial pressure of va ✅ The correct answer is option D.
Supercharging is the process of supplying the intake air to the engine cylinder at a density __________ the density of the surrounding atmosphere. September 13, 2025 by Admin equal to less than greater than ✅ The correct answer is option C.
The point of contraflexure occurs in September 13, 2025 by Admin cantilever beams simply supported beams overhanging beams fixed beams ✅ The correct answer is option C.
Which of the following refrigerant has the highest freezing point. September 13, 2025 by Admin Ammonia Carbon dioxide Sulphur dioxide R-12 ✅ The correct answer is option B.
The fuels in order of decreasing knock tendency for spark ignition engines are September 13, 2025 by Admin paraffins, aromatics, napthenes paraffins, napthenes, aromatics napthenes, aromatics, paraffins napthenes, paraffins, ✅ The correct answer is option B.
In a reaction turbine September 13, 2025 by Admin the steam is allowed to expand in the nozzle, where it gives a high velocity before it enters the moving blades the expansion of steam takes place partly in the fixed blades and partly in the moving blades the steam is expanded from a high pressure to a condenser pressure in one or more nozzles the pressure and tempe ✅ The correct answer is option B.