Correct
Incorrect
✅ The correct answer is option A.
Engineering MCQs
The capacity of a domestic refrigerator is in the range of
0.1 to 0.3 TR
1 to 3 TR
3 to 5 TR
5 to 7 TR
✅ The correct answer is option A.
The transmissibility, for all values of damping factor, will be less than unity, if ω/ωn is
equal to 1
less than 2
equal to 2
greater than 2
✅ The correct answer is option D.
In induction hardening __________ is high.
current
voltage
frequency
temperature
✅ The correct answer is option C.
The nozzle efficiency is the ratio of
workdone on the blades to the energy supplied to the blades
workdone on the blades per kg of steam to the total energy supplied per stage per kg of steam
energy supplied to the blades per kg of steam to the total energy supplied per stage per kg of steam
none of the above
✅ The correct answer is option C.
The design of the pressure vessel is based on
longitudinal stress
hoop stress
longitudinal and hoop stress
none of these
✅ The correct answer is option B.
The rate of flow of steam is __________ in case of fire tube boilers.
less
more
✅ The correct answer is option A.
Moment of inertia of a triangular section of base (b) and height (h) about an axis through its base, is
bh3/4
bh3/8
bh3/ 12
bh3/ 36
✅ The correct answer is option C.
The function of oil-control rings is that it
lubricates the cylinder wall by releasing oil from its hole
keeps the cylinder wall lubricated by holding oil in its channel
prevents engine oil from going into the combustion chamber and returns excess lubricating oil off the cylinder wall through the return holes in the piston to the oil pan
maintains a seal and p
✅ The correct answer is option C.
According to law of gearing, the common normal at the point of contact between a pair of teeth must always pass through the pitch point.
Correct
Incorrect
✅ The correct answer is option A.