In the manufacturing of lead shots, the property of surface tension is utilised. September 13, 2025 by Admin Agree Disagree ✅ The correct answer is option A.
The missing quantity is mainly due to cylinder condensation and a small amount of steam leakage past the valves and piston. September 13, 2025 by Admin Agree Disagree ✅ The correct answer is option A.
In a flange coupling, the bolts are subjected to September 13, 2025 by Admin tensile stress compressive stress shear stress none of these ✅ The correct answer is option C.
One kg of carbon produces __________ kg of carbon dioxide. September 13, 2025 by Admin 3-Jul 7-Mar 11-Mar 3-Nov ✅ The correct answer is option C.
The delay period in compression ignition engines depends upon September 13, 2025 by Admin temperature and pressure in the cylinder at the time of injection nature of the fuel mixture strength relative velocity between the fuel injection and air turbulence pressure of residual gases all of the above ✅ The correct answer is option D.
In a reaction turbine, when steam flows through the moving blades, September 13, 2025 by Admin pressure increases while velocity decreases pressure decreases while velocity increases pressure and velocity both decreases pressure and velocity ✅ The correct answer is option C.
The negative terminal post on the top of a battery is September 13, 2025 by Admin smaller than the positive terminal post larger than the positive terminal post of the same size as the positive terminal post none of these ✅ The correct answer is option A.
Air motors work on the cycle which is the reverse of the reciprocating air compressor cycle. September 13, 2025 by Admin Agree Disagree ✅ The correct answer is option A.
One m3 of methane (CH4) requires 2m3 of oxygen and produces 1m3 of carbon dioxide and 2m3 of water or steam. September 13, 2025 by Admin Correct Incorrect ✅ The correct answer is option A.
In cylindrical cams, the follower moves September 13, 2025 by Admin in a direction perpendicular to the cam axis in a direction parallel to the cam axis in any direction irrespective of cam axis along the cam axis ✅ The correct answer is option B.