to dip the nose and tail
to raise the nose and tail
to raise the nose and dip the tail
to dip the nose and ra
✅ The correct answer is option C.
Engineering MCQs
In order to ram the sand harder at the back of the mould and softer on the pattern face, a __________ is used.
sand slinger
squeezing machine
jolt machine
stripper plate machine
✅ The correct answer is option B.
Beryllium bronze has
high yield point
high fatigue limit
both (a) and (b)
none of these
✅ The correct answer is option C.
The angle on which the strength of the tool depends is
rake angle
cutting angle
clearance angle
lip angle
✅ The correct answer is option A.
A composite slab has two layers of different materials with thermal conductivities k1 and k2. If each layer has the same thickness, then the equivalent thermal conductivity of the slab will be
k1 k2
k1 + k2
✅ The correct answer is option D.
The thermal or temperature stress is a function of
increase in temperature
modulus of elasticity
coefficient of linear expansion
all of these
✅ The correct answer is option D.
By compounding the expansion of steam in two or more cylinders, the ratio of expansion
does not change
increases
decreases
✅ The correct answer is option C.
Fatigue test is carried out for
stresses varying between two limits of equal value, but of opposite sign
stresses varying between two limits of unequal value, but of opposite sign
stresses varying between two limits of unequal value but of same sign
all of the above
✅ The correct answer is option D.
The diagram efficiency is the ratio of
workdone on the blades to the energy supplied to the blades
workdone on the blades per kg of steam to the total energy supplied per stage per kg of steam
energy supplied to the blades per kg of steam to the total energy supplied per stage per kg of steam
none of the above
✅ The correct answer is option A.
In leaf springs, the longest leaf is known as
lower leaf
master leaf
upper leaf
none of these
✅ The correct answer is option B.