Automobile Engineering MCQs Archives - Page 32 of 33 - GetMCQs.com

lubricates the cylinder wall by releasing oil from its hole

keeps the cylinder wall lubricated by holding oil in its channel

prevents engine oil from going into the combustion chamber and returns excess lubricating oil off the cylinder wall through the return holes in the piston to the oil pan

maintains a seal and p

✅ The correct answer is option C.

The function of oil-control rings is that it

The sequence in which the force is transmitted through a brake system when the brake pedal is depressed is

In a four cylinder in-line engine, the number of firing strokes in one revolution of the crank is

The engine torque increases with the increase in engine speed up to a certain point after which it starts to fall down.

The effect of vapour locking on the brake performance is that the

In which of the following conditions, the idle CO percentage should be measured with the vehicle ?

Highest useful compression ratio (HUCR) is the highest compression ratio at which the

The reconditioning process used to give cylinder bore surfaces a cross-hatch pattern, is known as

Clutch facings are usually attached to the plate by

In petrol engines, during suction stroke, __________ is drawn in the cylinder