291. A sliding bearing in which although lubricant is present, the working surfaces __________ contact each other at least part of the time, is called boundary lubricated bearing.
partially
fully
✅ The correct answer is option A.
Machine Design MCQs
293. The centrifugal tension in the belt
increases the power transmitted
decreases the power transmitted
has no effect on the power transmitted
is equal to maximum te
✅ The correct answer is option C.
294. When two non-intersecting and non-coplaner shafts are connected by gears, the arrangement is known as
spur gearing
helical gearing
bevel gearing
spiral gearing
✅ The correct answer is option D.
295. The ratio of pitch circle diameter in millimetres to the number of teeth, is called
circular pitch
diametral pitch
module
none of these
✅ The correct answer is option C.
296. When the effort is in between the fulcrum and load, the lever is said to be of third type.
Correct
Incorrect
✅ The correct answer is option A.
297. The stretching in a belt can be controlled by __________ the stress in the belt.
reducing
increasing
✅ The correct answer is option A.
298. When a cylinder is subjected to a very high internal fluid pressure, the thin cylinder should be used.
Correct
Incorrect
✅ The correct answer is option B.
300. The shear modulus of resilience is proportional to
shear stress
(shear stress)2
(shear stress)3
(shear stress)4
✅ The correct answer is option B.