Author name: Admin

3946. Pick out the wrong statement pertaining to the design of the distillation column.

Generally, a skirt clerance of 0.5″ to 1.5′ is recommended to prevent plugging of the slots by residue build up.
The purpose of the slot is to disperse the gas into the liquid in the form of small bubbles.
If sufficient slot area is not provided, the gas may pass through the skirt clearance.
none of these.
✅ The correct answer is option D.

3962. Pick out the wrong statement pertaining to the use of valve tray, seive tray and bubble cap trays in continuous distillation column.

Bubble cap trays though most expensive are the best in situations, where low vapour rates is to be handled and a positive liquid seal is essential at all flow rates.
Murphree efficiency of all the three trays are nearly equal, however the peak efficiency is generally higher for seive and valve trays than the bubble cap.
Maintenance cost for valve and seive trays are comparatively more than bubble cap tray due to their relatively complicated construction features.
Valve trays have the highest turn down ratio (i.e. the ratio of the highest to the lowest vapour flow rates) and thus provides the maximum flexible operating range.
✅ The correct answer is option C.